CE type Reactors
Design Parameters
| Description | Inner vessel | Jacket |
| Design pressure | 6kg/cm2/F.V. | 6kg/cm2 |
| Design temperature | -25 to 200°C | -25 to 200°C |
| Max. allowable pressure | 6 kg/cm,2G/F.V. | 6kg/cm2G |
| Final hydrostatic test | 6kg/cm2 G | 6kg/cm2 G |
| Radiography shell/head | Spot /full | Nil/full |
| Joint efficiency | 0.85/1.0 | 0.70/1 |
| Corrosion allowance | 1.0/0.0/0.0 | 1.0/0.0/wetted/not wetted/GL |
DIN codes related to CE series reactors
| Overall Dimensions | DIN 28136 part 1‐2 |
| Nozzle Positions | DIN 28136 part 3 |
| Impeller Agitator | DIN 28157 |
| Baffles | DIN 28146 |
| Jacket Nozzles | DIN 28151 |
| General Tolerance | DIN 28006 part 2 |
| Assembly | DIN 28130 part 2 |
Material & Grades
| Main shell, heads, blind flange, manhole cover & Center opening cover (COC) | Enamel Quality steel SA 285 – Gr C SA 516M GR. 380 |
| Manhole (MH), main shell & COC body flange & main shell nozzles, MH protection ring, spindle | Enamel quality forging SA 836M or SA 181M Cl 60 |
| Pad plate, agitator connecting head, reducing flange, Agitator and baffle pipe & GL Pipes | Enamel quality forging SA836M or SA 181M CL 60 or SA 105M Enamel quality pipe SA 106 Gr. B. |
| Nozzle backing flange (split type) | SA 216 M Gr. WCB or SA 285 – Gr C/IS 2062 GRB |
| C Clamp & J bolts | SA 105M |
| Gasket | PTFE envelope-non-asbestos with SS304 corrugated ring inserts |
| Nozzle bolt & nuts | IS 1367 CL 4/4.6 |
| Jacket shell, heads & closer ring | SA 285 – Gr C |
| Jacket nozzle necks | SA 106 Gr. B |
| WNRF/ SORF flange for jacket nozzle supports | SA 105 Gr. B |
| Drive unit components | Carbon steel eqvt. To IS 2062 / CI, IS 210 Gr. 150 |
| Valves ( flush & diaphragm type) | C.I. – IS 210 Gr. 260 |
| Fittings ( bend, tee, reducer etc.) | C.I. – IS 210 Gr. – 150/SA 234 Gr. WPB SA 234M Gr. WPB or IS -210 Gr. 150 |